Comment on page
0. Getting started
(obviously)
Screwdrivers/wrenches:
- set of inner hex head screwdrivers no. 1.5 / 2.5 / 3 / 4 / 5
- set of flat hex-head wrenches no. 7 / 10 / 15 / 17
- Philips cross-head screwdriver
- Torx screwdriver no. T-20
Chemicals/equipment:
- silicone oil / WD40 or grease
- silicone sealant (tube)
- (recommended) Loctite – thread glue
- wiping towel
- soldering iron
3D-printer
Ca. 6 hours (after printing).
Know how to use a screwdriver and how to solder connectors.